F22 boiler error code: what it means and what to do

Updated on 19th November 2026:

Joanna Flowers

Technical Repair Engineer, British Gas

If your boiler is showing the F22 fault code, it usually means that it has low water pressure, or there isn’t enough water in the system. This can be a safety issue, so your boiler will automatically shut down until the problem is fixed.

Need help? Try our Instant Expert

Instant Expert is the online tool that gives you step-by-step instructions for simple boiler fixes. It’s quick, easy – and 100% free.

Try it now

Which boilers use the F22 error code?

F22 is used on a number of Vaillant and Glow-worm boilers, although the meaning of fault codes can vary by model – so it’s always a good idea to check your instruction manual.

What does error code F22 mean?

F22 usually appears when the boiler detects low water pressure or insufficient water in the system, then stops operating to protect itself.

What are the signs of an F22 error code?

When F22 appears, your boiler will usually stop working to protect itself. You’ll usually have no heating or hot water, and the pressure reading on your boiler may be below 1 bar. 

The F22 code will remain on the display until the problem has been resolved.

What can cause the F22 error code?

F22 most commonly appears when you have low water pressure in your heating system.

This can happen if water has been lost from the system – through a leak, for example. The code can also be caused by a problem with your boiler's pressure sensor, pump, wiring or expansion vessel.

Can I fix the F22 boiler fault myself?

The first thing to do is look for obvious signs of a leak, such as water around radiators, pipework or water cylinder, or beneath the boiler. If you do find a leak, don't keep topping up the system – just book an engineer and let them know.

If you can’t see signs of a leak, try these simple things before calling in a Gas Safe heating engineer:

  1. Check the pressure. Look at the pressure gauge or display. If it’s below 1 bar, you’ll know low pressure is likely to be causing the F22 fault. If it’s at normal pressure (between 1 bar and 1.5 bar), skip the next steps and book an engineer.
  2. Repressurise the boiler. Follow your boiler’s instructions for topping up the system using the filling loop or filling device. You should usually aim for around 1 bar to 1.5 bar when the system is cold – but double-check your boiler’s manual for precise instructions.
  3. Reset the boiler. Once the correct pressure has been restored, a reset might clear the F22 code.

When should I call an engineer for an F22 boiler error code?

First, try the simple fixes above. If F22 is still displaying after you've repressurised your boiler and tried a reset, it's time to book an engineer.

You should also get professional help if the pressure keeps dropping, or if the error keeps coming back.

Don't remove the boiler casing or try to repair internal components yourself.

How would an engineer fix an F22 boiler error code?

An engineer will first check your boiler's water pressure and look for anything that could be causing it to drop, such as a leak somewhere in the system.

If the pressure is normal, they’ll check different components, including the pressure sensor, pump, electrical connections and expansion vessel.

Once they've found the cause, they'll repair or replace the faulty component and check that your boiler is working properly again.

How can I prevent an F22 boiler error code in the future?

To reduce the risk of future problems, it’s a good idea to check your boiler's pressure from time to time and have it serviced regularly. We always recommend an annual service to keep your boiler working safely and efficiently.

If the pressure keeps dropping or you find you're having to repressurise your boiler frequently, get an engineer to investigate. Finding and fixing the cause early can help prevent the F22 error from coming back.

Still stuck? Try our online Instant Expert

Our Instant Expert tool is here to help. Just share some details about the issue and we’ll explain some simple things you can try to fix it yourself. It’s quick, easy and completely free.

Try it now