F27 boiler error code: what it means and what to do

Updated on 19th November 2026:

Joanna Flowers

Technical Repair Engineer, British Gas

If you’re seeing the F27 fault code, it means your boiler has detected a flame signal when there shouldn't be one. The boiler will usually shut down for safety until the problem is fixed.

Need help? Try our Instant Expert

Instant Expert is the online tool that gives you step-by-step instructions for simple boiler fixes. It’s quick, easy – and 100% free.

Try it now

Which boilers use the F27 error code?

The F27 fault code is used on a number of Vaillant boilers, particularly models in the ecoTEC Pro and ecoTEC Plus ranges.

It's also found on some Glow-worm boilers, including the Energy, Betacom, Compact and Ultracom2 ranges.

What does error code F27 mean?

Your boiler has an electrode that detects a successful flame when your boiler starts working. The F27 fault appears when the boiler detects a problem with this flame signal – such as sensing a flame when there shouldn’t be one.

What are the signs of an F27 error code?

If your boiler shows F27, it will usually lock out as a safety precaution – which can leave you without heating or hot water.

The code might return after resetting the boiler and, in some cases, you might notice moisture or signs of a leak around the boiler.

What can cause the F27 error code?

F27 can be caused by a gas valve that isn't closing properly, a faulty flame sensor or circuit board, damaged electrical connections, or moisture getting into the boiler's electronics.

Can I fix the F27 boiler fault myself?

Not usually, no. The fault involves the boiler's gas and flame-safety systems, so you'll almost certainly need a Gas Safe registered engineer to identify and fix the cause.

However, it’s worth resetting your boiler once to see if that helps.

When should I call an engineer for an F27 boiler error code?

If F27 stays on or comes back after one reset, book a Gas Safe registered engineer. They’ll be able to get things working again for you.

Don't remove the casing or attempt an internal repair yourself. And if you smell gas, leave the property and call the National Gas Emergency Service on 0800 111 999.

How would an engineer fix an F27 boiler error code?

An engineer will usually check the gas valve, flame sensor and its connections, and the circuit board. They'll also look for leaks or moisture that could be affecting the electronics.

If they find a faulty component, they’ll repair or replace it – and then test the boiler to make sure it's operating safely and F27 doesn't return.

How can I prevent an F27 boiler error code in the future?

You can't always prevent an F27 fault, but having your boiler serviced regularly can help. We always recommend an annual boiler service to keep everything working safely and efficiently.

You should also get your boiler checked if you spot leaks, condensation or other signs of moisture.

Still stuck? Try our online Instant Expert

Our Instant Expert tool is here to help. Just share some details about the issue and we’ll explain some simple things you can try to fix it yourself. It’s quick, easy and completely free.

Try it now